Introduction
Quick Navigation
The freedom to run around your yard is what your dog wants. As a dog owner, you would want to keep your furry friend safe within boundaries. You might want them away from places you don’t want them to go to. Putting up physical fences is a good means to set boundaries but is not very convenient. See how you can prepare for a new puppy.
The time and effort to set up one and how they would look in your environment brings about the inconvenience. However, a great alternative to the physical fences is the wireless fences for dogs. With these kinds of fences, you won’t bother digging and planting wires in the ground.
Benefits of Wireless Dog Fences
They are very comfortable for everyone
These fences are great for those who live in strict neighborhoods, like those that prohibit fences. These wireless fences can stay in your yard without violating the rules of your neighborhood.
People who dislike seeing common wooden or metal fences around can use these wireless fences. You won’t have to see traditional ones around your yard.
Wireless dog fences are very protective
They block dogs from prohibited areas like your garden that’s full of vital crops or your swimming pools. With these fences, your dogs are kept safe from places that could be harmful to them. Also, you would be able to keep your dogs away from places they could destroy, like your gardens.
They are easy to set up
It takes much time and effort to set up traditional fences. It costs much too. The wireless dog fences, on the other hand, are time-saving. It’s affordable, and you can set it up fully within an hour.
They are portable and mobile
Wireless dog fences are very portable and offer much mobility. Anytime you have to move to a new location, putting up boundaries would be easy with wireless dig fences. Even when you go on vacations or outdoor trips with your dogs, these fences will help keep your dogs within safe areas.
How Do Wireless Fences Work – Setting Up Boundaries
A transmitter forms a circular boundary around the safe zone of your dog via the signal it produces. With these wireless fences, you’re able to make your dog’s safe zone much larger. You can adjust it from at least 10ft to a broader space of nearly 3 acres in size.
Aside from the transmitter, your dog would wear a unique collar. The work of the collar is to pick up the signals from the transmitter. It beeps anytime your dog goes close to the boundaries.
Now, if your dog disregards the beeps and tries to go to the restricted area, the collar would still restrict your dog. It will produce a moderate electric simulation through contact points that will make your dog uncomfortable. However, it is safe. Through this simulation, your dog would begin to avoid the restricted areas.
How to Set Up Wireless Dog Fences
It’s easy to set up these fences in your yard; this is why many dog owners prefer these wireless fences over the traditional ones that are wired underground. Nevertheless, some models might come with a unique procedure, but the primary set up stays applicable to all models. Below are the necessary steps to follow.
Choose a Spot For Your Transmitter
Firstly, choose a suitable position for mounting the transmitter. Moreover, you should bear in mind that the selected spot would ascertain the actual safe area. To make the right choices, you should consider the following:
Choose a spot that’s near a power outlet. This will enable the unit to be easily powered.
It should be above the floor, somewhere between 3ft and 5ft.
The spot picked should be far from bigger equipment that is made of metal. The distance should be at least 3ft to 5ft or apart or even further.
Concrete walls weaken the signals the transmitter produces, especially if these concrete walls are in the middle of your yard and the transmitter. However, it’s much favorable to pick a location that is close to the outer walls in your yard.
Switch On the Signal Receiver Collars
There are receiver collars that use batteries that can be replaced, whereas some can be recharged. You just have to switch on the collar. However, some collars need to be registered before switching it on.
To do this, you should simply take them to the transmitter while holding the collar, then click some buttons on the transmitter to register the collar. Also, read about flea collars and how they work.
Fix the Radius of Your Containment Area
Two persons are needed to carry out this task. At the place you choose to set up your boundary, a friend should stand while holding the collar. Just hold it up about the same height as your dog. While your friend does that, stay inside and adjust the radius of your dog’s containment area.
Set the Correction Level
The collar has a “MODE” button on it that is used to set the level of correction. When you press the button, there will be a few beeps. If it beeps once, then the level is at one. The level is at two if it beeps twice. All of this means that the beeps indicate the level of correction. It is advisable to consult a dog trainer when selecting the right correction level instead of setting it aimlessly.
Mount the Flags
Gradually move towards the boundaries while holding the collar. Stop when you hear a beep and mount a single flag at that spot. Repeat this process for other parts of the boundaries. In the end, it should form a circle. There should be spacing between the flags, like 7-10ft.
Mount the Transmitter
Mounting the transmitter comes last because the spot for the unit has to be carefully chosen first. Doing this as the last thing helps prevent future inconveniences. There could be a situation where you would mount the transmitter firmly and later find out that the chosen spot wasn’t good at first.
Conclusion
Undoubtedly, wireless fences are great alternatives for dogs. The ease of setup and effectiveness is what dog owners love about it. Setting up boundaries can be done easily with these fences, thus protecting your dogs from restricted areas that aren’t safe. It’s also an excellent way to keep your dog away from places you don’t want them to mess up.